A mechanical seal is basically the most essential part of the modern industrial sector. A seal is method that is used to contain fluid or gas in a pump, vessel or compressor. For example, shaft seals are used in mixers, pumps or anything in which a rotating shaft is passed through a stationary housing, and mechanical face seals are used where leakage has to be reduced to a vapor.
Seals have a wide area of applications; hence their usage is not fixed to any one type of equipment. Applications of seals include ships, rockets, automobiles, industrial pumps, compressors, dishwashers, pools and many more.
Seals come in many forms including compressor seals, single and multi-spring pump seals, metal bellow seals, mixers and cartridge seals. You need to identify the temperature range, application and the environment of the seal you’re selecting. You need the correct environment for the seal to endure with your application.
If you choose the correct seal for the job, you get the following advantages:
- Prevention of environmental contamination
- Cost savings
- Longer life of the seal
- Machine safety
BASIC PARTS OF THE SEALS:
Mechanical seals are made up using three basic parts:
- Set of primary seal faces
- Set of secondary static seals (this includes o-rings, wedges or v-rings)
- Sprint (to maintain the face contact)
ASP helps its customers by selecting the right seal for their application. This selection can be best made if you have an in-depth knowledge of the operating conditions, i.e. pressure, temperature and the characteristics of the liquid. Abrasive liquids can create excessive wear or the seal and hence shorten its life, thus, it is an important factor in choosing the type of seal.
To learn more about which type of mechanical seal would be best suited for your application, visit https://www.mechanicalseals.net/. Check out their wide variety of seals at their website now!
No comments:
Post a Comment