A seal is a fluid
containing device. It keeps the fluid within a vessel where a rotating shaft
passes through housing or where housing rotates around the shaft. Such vessels
are mainly pumps, mixers, agitators, and other bulky machinery. The purpose of
a mechanical seal is to allow the shaft to rotate freely without allowing large
amounts of fluid to escape. A typical cutaway of a mechanical seal with a shaft
passes through its center. However, this seal differs from the mechanical seal
as it comes in two separate pieces. Unlike an ordinary cartridge mechanical
seal, these two pieces of seals can be installed or removed from around a shaft
without disassembling the whole equipment. When joined, the sealing elements
are mated to create a proper and strong seal around the shaft. The split seals are
a hassle-free and a robust option at the same time.
Where to use spilt
seals-
These applications
benefit from split seals as the equipment they are installed in
require huge amounts of time for disassembly. The use of splits in such
applications saves installation time, reduces sleeve wear, increases equipment
reliability, and reduces maintenance costs. The increase in the initial cost
for split mechanical seals calls for implementing them in the system when
savings from the above-mentioned benefits outweigh the increase in initial
costing. In most cases, the savings can be significant.
Where to avoid split
seals-
These seals are not
recommended for applications in which potential emissions or leakage may become
a threat to company personnel or the environment. Due to the way split,
mechanical seals are constructed, they have an increased amount of potential
leak paths. Use the split seals at
the right place and they will work wonders. Buy them now at the website link
given below.
